V1.1 release - some minor updates !

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

V1.1 release - some minor updates !

Post by Denford Admin » Wed 08 Mar , 2006 17:57 pm

Get it from same location as v1.0
Top
User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Wed 08 Mar , 2006 17:59 pm

Just added a couple more machines to choose from, and enabled Routers to be selected.

Boxford post output also checked and tested - working OK !
Boxford post is a .BOX file which you need to import and convert it into a GMM file
Top
Post Reply

Return to “QuickCAM / LaserCAM 2D Design”