tools in Quickcam 2d

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
dwightfreeman
Posts: 2
Joined: Wed 11 Aug , 2010 14:01 pm

tools in Quickcam 2d

Post by dwightfreeman » Mon 09 Jan , 2012 3:44 am

in my tool libary I havw 18 tool defined, but only 4 show up on my tool list when making my tool paths.
How can I get all of my tools that are in my libary to show on my tool list

Dwight From Saco, MT

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: tools in Quickcam 2d

Post by Denford Admin » Mon 09 Jan , 2012 11:37 am

Firstly make sure you have downloaded the latest version of QuickCAM 2D as the tool link between that and VR Milling 5 has been improved:
http://www.website.denford.ltd.uk/suppo ... -downloads

This document may also help you:
viewtopic.php?f=1&t=2970

Post Reply