QuickCAM 2D and LaserCAM 2D v1.15 released 7th Sep 2011

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM 2D and LaserCAM 2D v1.15 released 7th Sep 2011

Post by Denford Admin » Wed 07 Sep , 2011 16:42 pm

// 1.15 - 24/5/2011 fixes to the output file location (stops it always defaulting to untitled.fnc in the my docs folder and works off the .mcm file's location)
// 1.15 - 07/9/2011 fix for "Error reading Splitter1.ExplicitHeight: property does not exist." when trying to adjust bitmap images
// 1.15 - 07/9/2011 added ability to drag and drop images directly onto the application

As usual - check here for the latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply