Rotate Imported JPEG in LaserCam?

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
GUYWTC
Posts: 2
Joined: Mon 23 Nov , 2009 10:41 am

Rotate Imported JPEG in LaserCam?

Post by GUYWTC » Wed 07 Jul , 2010 19:23 pm

Hi,

Can you rotate an image that has been imported into LaserCam. I was trying today and I couldn't do it?? I can rotate lines and text etc but when trying to rotate an image it just 'moved' the image rather than actually rotating it.

I wil admit that it's not the latest version of the LaserCam software.

Thanks,

Guy

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Rotate Imported JPEG in LaserCam?

Post by Denford Admin » Thu 08 Jul , 2010 11:31 am

If these options aren't shown on yours then you need to update to the latest version.
As you can see, there are all kinds of image adjustments you can make now:

(Screenshots are from QuickCAM 2D, but it's exactly the same on LaserCAM)
Attachments
quickcam-image-adjustments.jpg
quickcam-image-adjustments.jpg (142.37 KiB) Viewed 10581 times

GUYWTC
Posts: 2
Joined: Mon 23 Nov , 2009 10:41 am

Re: Rotate Imported JPEG in LaserCam?

Post by GUYWTC » Thu 08 Jul , 2010 11:38 am

Many thanks,

I thought it might be a question of running old software!

Guy

Post Reply