LaserCAM and QuickCAM 2D v1.10 released 2nd Nov 2009

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

LaserCAM and QuickCAM 2D v1.10 released 2nd Nov 2009

Post by Denford Admin » Mon 02 Nov , 2009 12:19 pm

Changes:

QuickCAM only:
// 1.10 - Fixed a problem where the billet is less than 10mm you get a Z outside billet warning when checking output
// 1.10 - improved circle and arc output
// 1.10 - Fixes to make auto-sending CNC output to VRMilling 2 or 5 more reliable
// 1.10 - Improved output of all CNC paths to favour CW direction (when sort paths is ticked)
// 1.10 - Added profile direction arrows to CNC output simulation wizard- clicking on the profiles will change the toolpath direction

Both QuickCAM and LaserCAM
// 1.10 - Fixed the drag and drop routine to import things like dxf and eps better when dropping files on
// 1.10 - Gerber reader changes to read multiple commands on each line (denoted by * in the .gbx file)
// 1.10 - Added image mirror into image adjust screen
// 1.10 - minor changes to contour bitmap - its much better with shapes like lettering





As usual - check here for the latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply