LaserCAM and QuickCAM 2D v1.9 released 7th July 2008

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

LaserCAM and QuickCAM 2D v1.9 released 7th July 2008

Post by Denford Admin » Tue 08 Jul , 2008 9:13 am

Changes:

* Added EPS and PS imports (basic, but good for logos from www.brandsoftheworld.com)

* Added option to turn off auto-joining when going into the wizard (NB this option is useful when your design consists of indivdiual lines which you may want to cut with different plans or depths. However, if you join lines together in the drawing area first using the join command, then they will remain joined in the wizard. So, a mixture of multi-line shapes and single line paths is possible)

* Fixed a circle expand bug in Postprocessor output - if the XY arc start and end points had different Z values


As usual - check here for the latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply