LaserCAM and QuickCAM 2D v1.8 released 4th Feb 2008

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

LaserCAM and QuickCAM 2D v1.8 released 4th Feb 2008

Post by Denford Admin » Mon 04 Feb , 2008 15:38 pm

Small changes have been made to QuickCAM and LaserCAM.

The most significant is the addition of Versalaser exhaust / extraction alarm configuration from the install menu of LaserCAM 2D

QUICKCAM:
Changed the minimum angle between lines in the Convert Lines To Arcs routine. It will now include arcs with bigger rads

Made the 2D simulation animation speed slider visible at all times

LASERCAM and QUICKCAM:
Fixed a bug with colour picker not showing if the current colour didn't exist in the newly selected pallete

Addded the ULS Denford exhaust warning configuration application to the installation CD menu


As usual - check here for the latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply