Stand off height when machine is not cutting material

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Stand off height when machine is not cutting material

Post by bradders » Thu 13 Sep , 2007 11:28 am

How do I change the Stand off height from the default 2mm when my machine is not cutting material ?
Last edited by bradders on Thu 13 Sep , 2007 11:30 am, edited 1 time in total.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 13 Sep , 2007 11:30 am

Browse the following path

C:\Documents and Settings\All Users\Application Data\Denford\Posts
Select the post you are using and change the line
safe2=2 to say safe2=10 for a 10mm stand off

User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Post by boots » Tue 05 Feb , 2008 15:05 pm

What program do I open these files with?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Tue 05 Feb , 2008 15:49 pm

They will open in Notepad and perhaps other text editors

User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Post by boots » Tue 05 Feb , 2008 16:22 pm

Thank you.
Saves time going thru the editor.

Post Reply