// 27th November 2017 - v5.66

Download the latest version on this page:
http://website.denford.ltd.uk/software- ... s-support/

// QuickTURN2D v1.29 - 2nd October 2017


As usual - check here for the latest version:
http://website.denford.ltd.uk/software- ... s-support/

v1.16 - 6th Feb 2018

check here to download the latest version:
http://http://website.denford.ltd.uk/so ... s-support/

// Lasercam v 2 - 15th Aug 2016
// Quickcam v 2.2 - 7th Jun 2017


As usual - check here for the latest version:
http:/http://website.denford.ltd.uk/software- ... s-support/

There is a new version of VR Turning

The machine type selected is checked against machine type that the card is programmed with.

The connection to the machine uses the latest DLLs from ABB/Baldor.

This can be downloaded from the address : http://www.denfordata.com/downloads/vrturningv1_49.zip

//v1.29 - 11th April 2017 - The internal cut may now extend out of the back of the external cut and be modified further. There is also a bugfix so that the start of the internal line can be modified. Check here to download the latest version of all software: http://www.denfordata.com/downloads/Quick...

This document shows you how to set the permissions in Windows to allow files to be written to the common ProgramData directory. Try this if you get error messages when trying to save configuration files, like saving the tooling configuration or offsets. The Denford software stores data in a shared d...

The Denford company website has been updated and is moving to the address of http://denford.co.uk from the old address of denford.ltd.uk. The software support and download page can still be reached from the address of http://oldwebsite.denford.ltd.uk/index.php/support/88-downloads-cat/99-software-do...

The software download page has move temporarily while the new Denford website is being set up. It can now be reached at the address of :

http://oldwebsite.denford.ltd.uk/index. ... -downloads

Hi. When the DXF file is imported into the latest version, 5.64, the output path appears to be followed correctly.
This is produced using a single 'Follow Cut' path. Can you try the latest software version please?

Hi. We've tested VR Milling here and it does appear to work just the same in Windows 10. Is it possible to attach the fnc file that caused the problem?

Hi. VR Milling converts the shallow arc into four lines. It needs to do this for the path calculations. We've tried the same DXF file with Quickcam 2D and the file is then imported as an arc. Do you have an installation of Quickcam to import the DXF file, and then send the produced fnc file to VR Mi...

//v1.23 - 7th October 2015 - The created GCode moves internal drill operations straight down to the x=0 position in line with the center of the billet, rather than to the edge of the billet first and then down. The spindle is always brought to a halt in the GCode when a tool is changed. There is an ...

Bug fix to the simulator so that the drill will not hang the simulator if it is moved to x=0, z=0.

Download the latest version on this page:

http://www.denfordata.com/downloads/vrturningv1_43.zip

Change to the tool selection so that the billet when using a 4th axis will not rotate the billet back to zero degrees when a new tool is selected.

Download the latest version on this page:

http://website.denford.ltd.uk/index.php ... -downloads

Hi. Thank you for trying that. The candidate release has now been made the official download release.

Hi. There has been a change to VR Milling with a new release candidate to try please. 1. Stop any current Denford software. 2. Download the new installation from : www.denfordata.com/downloads/VR Milling V5 CD-ROM.Candidate.zip 3. Unzip and install this installation. It should allow tool values grea...

//v1.22 - 25 March 2015 - Improved version of the DXF import procedure which allows for more robust handling of DXF files.

Check here to download the latest version of all software:
http://website.denford.ltd.uk/index.php ... -downloads

Hi. There is a new version of Quickturn that has just been uploaded. Can you please try installing this new version 1.22, and see if that imports the file as expected. If not then can you please attach the DXF file to this forum thread.

Hi. Thankyou for providing the DXF files. There is a new version of Quickturn that has been uploaded, version 1.22. This has been edited and will load your DXF files correctly. If you have difficulty with any other files then can you provide them too please. The new installation is at: http://www.de...