Search found 47 matches
- Sun 11 Jun , 2017 22:57 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Yes they are old , I have one that is "fanuc ot off-line qwerty keyboard" and "denford lathe libraries", Would it be possible just to swap the disc reader for a usb flash drive and download whatever I need to make it work. I am still having problems . I have to plug the denford tutor keyboard into t...
- Tue 06 Jun , 2017 20:54 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Thank you.
- Mon 05 Jun , 2017 20:12 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Ok I have the machine 100% mechanically sound now. Everything is working. I just want to say thanks for the help. I would like to find a drawing or just get measurements for the tool clamps for the turret. I found in and older post what I think is the part number and that is AC2/802A . I am sure I c...
- Thu 01 Jun , 2017 22:20 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Ok I have it working kind of so-so. I have some questions in assembling the DM8 tool post 1- Is there a why to time the gearbox , such as the distance/ position of the spindle in the bronze gear . It will index but the tool holder/turret has to be loose or when tightened it lock up bigger than you k...
- Thu 01 Jun , 2017 14:44 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
In dismantling and cleaning and freeing up the gear box and adding new grease and getting everything working I have a problem where as the tool changer will turn but it seems that it need to reverse to unlock the turret . The question is does it have to reverse in order for the center shaft that thr...
- Tue 30 May , 2017 11:27 am
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I can take a picture of the pieces. I had enough and took it all apart .the grease in there was hard and even taken apart it was hard to turn, but nothing appears to be damaged. I am going to clean and add new grease . Can anyone tell me what grade of grease would be best as I don't want to take thi...
- Mon 29 May , 2017 15:25 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I may stand corrected and now think it is a DM8 , I did find a drawing in some older posts on here . I took the cover off the electrical wiring machined box and it looks good inside . I will continue to investigate.
- Mon 29 May , 2017 12:45 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Well I have made leaps and bounds in getting the lathe to do something. The current problem is the tool turret will not turn. When I go "Home" and then "jog" to type in the tool number all I can hear is a humming like its trying to turn , but no such luck. Would anyone have experience in this matter...
- Wed 19 Apr , 2017 10:51 am
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I will give it a try. I will let you know. Thanks mike .
- Tue 18 Apr , 2017 11:29 am
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Ok so I need a keypad membrane. The batch number is 147892 made by RH Technical Industries . Can I change the keyboard out with another or would it be possible to find a new keyboard. Thanks for any help. Mike
- Mon 17 Apr , 2017 11:12 am
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Well got the screen to come up , its the tutorial screen , and now the keyboard doesn't seem to respond. So have to check that out. The keyboard that I plugged into the side of the cabinet works in order to bring up the setup screen on the Denford monitor but nothing form the qwerty tutor board. Do ...
- Sat 08 Apr , 2017 12:40 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Got a guy coming today to take a look, if I get thing going I will post a video if I can. Mike
- Fri 07 Apr , 2017 19:54 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
We checked the power like Martin has said to do and it checked out, also pulled the cards numerous times and reinserted. The monitor screen does show a glow, but nothing else. You can see the glow especially when you shut it down as it goes out like an old TV. I just think I am doing something stupi...
- Fri 07 Apr , 2017 19:22 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Should also mention I have the 3.5 floppy disks. "Fanuc ot offline programming qwerty keyboard", "lathe cam operating disk ver 1.3", "denford libraries disk", then 2 with hand writting that say "denford librarys disk" and "lathe cam designer ver 1.3". I am wondering if the fact that the lathe has ha...
- Fri 07 Apr , 2017 19:12 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I did find 2 cd disks this morning ,one is "Vitual Reality" ver 1.10 and NCEdit32 ver 2.0
- Fri 07 Apr , 2017 16:13 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I think I have been doing this all wrong. I have found out that I am supposed to have a security key/ dongle which I do not have. Is there a way around this? The machines serial number is EO5266. What would be the current software to use for a Cyclone . Am I asking the right question ? Mike
- Wed 05 Apr , 2017 13:07 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Like I said Martin you are alright. I do have 1 long and 3 short beeps. I will be checking the power here soon and see what I get. If there is anything wrong I do have the cabinet from the triac and it looks like the power supply is the same , the model numbers are the same. I have tried contacting ...
- Tue 04 Apr , 2017 17:45 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I see in my last post I said the fan comes on in the computer, I should have said the fan in the computer power supply comes on. So I would think its alright, but maybe its not ?
- Tue 04 Apr , 2017 10:25 am
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
I am in Illinois about 70 miles south of Chicago. I do have the fan runs in the computer and actually all the fans come on, the work light also comes on . I get an audible alarm or a buzzer that sounds for a few seconds. I think all the power lights come on in the back. The screen also comes on but ...
- Mon 03 Apr , 2017 18:51 pm
- Forum: Cyclone
- Topic: cyclone tu150e
- Replies: 39
- Views: 24960
Re: cyclone tu150e
Here is a picture of the back. Is there something missing ? I added the pictures but look please at the one with the 2 yellow circles. Should these 2 connectors be jumper-ed together as they look to be in the triac vmc cabinet. Thank you