There is a new version released, V1.35, which keeps the angle value of tools regardless of the measurement type. We'll look at the import conversion issue next.

QuickTURN2D v1.35 released 2nd December 2022 v1.35 - If QuickTurn was set to use imperial measurements, then the angle of tools in the tool editor was also being converted by 2.54. The angles now keep their original value regardless of measurement type. Find the latest version here: https://www.denf...

Thankyou for that excellent writeup of how to repeat the issue. We're looking to fix this at the moment.

QuickCAM PRO v1.26 released 12th October 2022

Several program plans have been added. Pressing the Load plans button opens at the correct directory in the documents folder.

Check here to download the latest version:
https://www.denfordata.com/downloads/qu ... ov1_26.zip

Check here to download the latest version of all software:
https://www.denford.co.uk/software-downloads-support/

//26th September 2022. Addition of vaccuum bed control button.
The vacuum bed control button is now activated on the Compact 1000s, Router 2600s and 6600s.

VR Milling v6.4 released 20th September 2022 Check here to download the latest version of all software: https://www.denford.co.uk/software-downloads-support/ //20th September 2022. Opening the door whilst homing will now always cancel the homing operation. When to connecting to a machine that is of ...

VR Milling v6.3 released 7th September 2022

Check here to download the latest version of all software:
https://www.denford.co.uk/software-downloads-support

//7th September 2022. Improved response time from the axes when the stop button is pressed.

QuickCAM 2D v2.8 released 1st July 2022

The tool library for QuickCAM 2D comes from with VR Milling 5 or 6 depending on which is installed, or both if they are both installed.

As usual - check here for the latest version:
http://www.denfordata.com/downloads/Qui ... gnv2.8.zip

QuickCAM PRO v1.25 released 17th Agust 2022 The tool library will come from either VR Milling 5 or 6 depending on which is installed. If they are both installed then there will be a choice in the options menu. The top Z on the Set Model Position page will default to 1 if there is space for that. Che...

QuickCAM PRO v1.25 released 17th Agust 2022 The tool library will come from either VR Milling 5 or 6 depending on which is installed. If they are both installed then there will be a choice in the options menu. The top Z on the Set Model Position page will default to 1 if there is space for that. Che...

QuickCAM PRO v1.25 released 17th Agust 2022 The tool library will come from either VR Milling 5 or 6 depending on which is installed. If they are both installed then there will be a choice in the options menu. The top Z on the Set Model Position page will default to 1 if there is space for that. Che...

Do you run the software with VR Milling 5? If so then try downloading and installing the latest version from scratch.

http://www.denfordata.com/downloads/VRMilling_V5_71.zip

Otherwise could you please take a screenshot of the error message?

Hi Max. In version 1.34, from the main screen, can you select Options and then make sure that Hardware Render is definitely selected. If it was off before then does this make a difference to you? hardwarerender.png If I then have just a single tool of RH turning, the plan does perform roughing cuts ...

Check here to download the latest version of all software:
http://website.denford.ltd.uk/software- ... s-support/

//18th October 2021. New settings for F1 Router with an extended range on the Y axis.

Hi Max. You are correct, the angle in degrees was being converted as though it was from mm to inches. This has now been corrected in the latest version 1.34 which can be downloaded from the website. Having a license or not won't make a difference.

QuickTURN2D v1.34 released 3rd August 2021 v1.34 - The graphics library that runs the simulations has been updated and edited to accomodate all types of graphics card. Modern laptop PCs are often shipped without the correct openGL libary. That won't be an issue anymore, and QuickTurn will always be ...

QuickCAM PRO v1.23 released 14th June 2021 Two bug fixes : 1. If a car was first modelled with axle holes, those axle holes would not be reset and carried over into the next model, even if it wasn't a car. Axle holes will now always reset themselves. 2. If the 4th rotary fixture on the CNC file outp...

Check here to download the latest version of all software:
http://website.denford.ltd.uk/software- ... s-support/

Addition of the F1 Router as a machine, and all machines have new manuals.

The webshop for isupply3d has moved. The new address is :

https://denfordwebshop.com

Hi. There is a new version, 1.53, which fixes the issue. Blank lines are left in and not given a line number, and it doesn't wipe out the existing gcode.

http://www.denfordata.com/bb/viewtopic.php?f=8&t=5977