Thanks Admin,
OK it appars that the switch isn't the problem... so is there a relay in the loop that could be sticking on power up?
Cheers
BPM
Search found 145 matches
- Tue 07 Jun , 2011 12:26 pm
- Forum: Novamill
- Topic: Novamill intermittent sticks at S on startup...
- Replies: 4
- Views: 4146
- Wed 25 May , 2011 13:11 pm
- Forum: Denford Classifieds
- Topic: Wanted - Jaws for Novaturn chuck.
- Replies: 0
- Views: 1832
Wanted - Jaws for Novaturn chuck.
My Novaturn only came with the one set of jaws, they step up towards the centre of the chuck.
Looking for the other set which I assume are the "external" ones.
Cheers
Barry M
Looking for the other set which I assume are the "external" ones.
Cheers
Barry M
- Wed 25 May , 2011 12:24 pm
- Forum: Novamill
- Topic: Novamill intermittent sticks at S on startup...
- Replies: 4
- Views: 4146
Novamill intermittent sticks at S on startup...
Hi, I'm looking for a little help on fault finding. Some times (usually after its been heavily used over the weekend and then left for a week) my novamill base unit boots and sits with the denstep display at S. The machine doesn't initiate and the gentle hissing noise from the mill doesn't occur. It...
- Tue 17 May , 2011 0:00 am
- Forum: Software
- Topic: DOS software Fanucl , Fanucld , Fanucsld etc.
- Replies: 5
- Views: 9823
Re: DOS software Fanucl , Fanucld , Fanucsld etc.
hi, is there any way to get the dos sw running without being connected to my novaturn? It'd be nice to have the option to run simulations in the house rather than the garage.
Any help appreciated.
Ta
barry m
Any help appreciated.
Ta
barry m
- Mon 16 May , 2011 23:54 pm
- Forum: Software
- Topic: Enabling the feedrate and Spindle overide sliders on Machine
- Replies: 3
- Views: 4526
Re: Enabling the feedrate and Spindle overide sliders on Machine
ok thanks will give that a try. If you can confirm the pot values that'd be great.
Thanks again.
Barry M
Thanks again.
Barry M
- Mon 16 May , 2011 12:25 pm
- Forum: Software
- Topic: Enabling the feedrate and Spindle overide sliders on Machine
- Replies: 3
- Views: 4526
Enabling the feedrate and Spindle overide sliders on Machine
Hi, The feedrate and Spindle overide sliders on my Machine Auto tab are greyed out, can I enable them for working with my Novamill? I'm on the legacy VR milling as I have a RS232 controller, (v2.28, i think had some compatibility issues with v2.31). Also having reviewed the electrical schematics for...
- Wed 04 May , 2011 13:29 pm
- Forum: Novamill
- Topic: Novamill Stepper motor
- Replies: 1
- Views: 2865
Novamill Stepper motor
I've been contacted by a collegue who has (on the back of seeing my machine) just aquired a run down 1999 Novamill, unfortunately its missing parts etc. It has been stripped of stepper motors and is missing other odd bits. Having looked at the assembly drawings the stepper motor part number is BI 00...
- Thu 21 Apr , 2011 14:13 pm
- Forum: NovaTurn
- Topic: Novaturn Auto toolchanger tool sizes
- Replies: 4
- Views: 5423
Re: Novaturn Auto toolchanger too sizes
excellent thanks v much.
- Sat 16 Apr , 2011 22:56 pm
- Forum: NovaTurn
- Topic: Novaturn Auto toolchanger tool sizes
- Replies: 4
- Views: 5423
Re: Novaturn Auto toolchanger too sizes
thanks. Do you still sell the 12mm bushes, or can you provide drawings for me to make some?
Thanks.
Barry m
Thanks.
Barry m
- Wed 13 Apr , 2011 20:56 pm
- Forum: NovaTurn
- Topic: Novaturn Auto toolchanger tool sizes
- Replies: 4
- Views: 5423
Novaturn Auto toolchanger tool sizes
Just to confirm 12mm square for external tools and 18mm dia for boring bars?
Cheers
Barry M
Cheers
Barry M
- Mon 11 Apr , 2011 22:44 pm
- Forum: NovaTurn
- Topic: Novaturn and FLSTEP
- Replies: 6
- Views: 8468
Re: Novaturn and FLSTEP
Thanks to all, she's ALIVE!! :-)) An old V1.6 EEPROM that came in a box of bits with my Novamill (compatible with FLSTEP) helped alot and Dosbox is essential, otherwise you get intermittent comms issues. Dont miss that you need to enable the comms ports in dosbox as real ports, that cost me a hour o...
- Mon 11 Apr , 2011 13:19 pm
- Forum: Denford Classifieds
- Topic: Wanted Novaturn Tailstock
- Replies: 1
- Views: 2141
Wanted Novaturn Tailstock
Looking for a Novaturn tailstock for a 1996 machine.
Cheers
Barry M
Cheers
Barry M
- Mon 11 Apr , 2011 13:18 pm
- Forum: Denford Classifieds
- Topic: WANTED - Novaturn
- Replies: 2
- Views: 2437
Re: WANTED - Novaturn
Got One!
- Sat 09 Apr , 2011 20:32 pm
- Forum: NovaTurn
- Topic: Novaturn and FLSTEP
- Replies: 6
- Views: 8468
Re: Novaturn anf FLSTEP
ooops zip attached
- Sat 09 Apr , 2011 20:25 pm
- Forum: NovaTurn
- Topic: Novaturn and FLSTEP
- Replies: 6
- Views: 8468
Novaturn and FLSTEP
Hi, Having got to grips with my novamill (which is excellent by the way), i've taken the next step and got a novaturn on the basis that the flstep software was availble here. I've read the forum fairly thoroughly but cant seem to get FLSTEP to connect to the novaturn. The novaturn seems to power up ...
- Tue 22 Mar , 2011 23:24 pm
- Forum: Novamill
- Topic: Novamill, ancillary ports...
- Replies: 0
- Views: 2495
Novamill, ancillary ports...
Hi, I have a novamill that I'd like to add functions to. I noticed that MCodes allow for aux inputs coolant on etc. Are there any spare channels in the control box for my novamill that i can use to integrate other devices? Also is there a spare motor control channel that i could use to drive a rotar...
- Tue 22 Mar , 2011 21:36 pm
- Forum: Denford Classifieds
- Topic: WANTED - Novaturn
- Replies: 2
- Views: 2437
WANTED - Novaturn
Novaturn or similar. Preferably in north west of england but can arrange transort if required.
Thanks
Barry M
Thanks
Barry M
- Fri 18 Jun , 2010 17:41 pm
- Forum: Denford Classifieds
- Topic: Wanted - Desktop CNC lathe, preferably novaturn +- Software
- Replies: 1
- Views: 2319
- Wed 16 Jun , 2010 22:56 pm
- Forum: Denford Classifieds
- Topic: Wanted - Desktop CNC lathe, preferably novaturn +- Software
- Replies: 1
- Views: 2319
Wanted - Desktop CNC lathe, preferably novaturn +- Software
WANTED Novaturn or similar, must be complete and functional. Note if software and dongles etc where appropriate are not included there is a significant charge for replacement from Denford and any agreed price will have to reflect this additional cost. Preferably in north west of england but can arra...
- Thu 26 Nov , 2009 10:20 am
- Forum: VR Milling - All Versions
- Topic: Novamill and Vr milling 2.31
- Replies: 12
- Views: 8166
Re: Novamill and Vr milling 2.31
Thanks guys, thats very interesting. I have always suspected that the upload to the machine had been corrupted but wanted to exclude any other possibilities prior to trying the new software again. I think I'll use my new null modem cable to bypass the provided cables direct to the main board connect...