I seem to remember updating the code a while back to help fix sequence table entries going missing - as I remember it was problems with NT (which you'd also get in XP) over windows 95/98
Have you got the latest version ? (see: http://www.denford.co.uk/technical-support.asp)
Search found 3645 matches
- Wed 05 Apr , 2006 22:57 pm
- Forum: Robots / CIM / VR CIM
- Topic: Fixed row count must be less than row count
- Replies: 3
- Views: 16606
- Wed 05 Apr , 2006 22:51 pm
- Forum: Robots / CIM / VR CIM
- Topic: VR Robot CIM
- Replies: 2
- Views: 13807
There should be two files on the flash disk - depending on age of disk. One is the actual text of your flash license, the other is an EXE which contains the flash code and will put it in the right place. You should be able to take whatever is in the INI text file paste it into cim.ini Also, try chan...
- Mon 03 Apr , 2006 12:32 pm
- Forum: Software
- Topic: Which software for STARTURN?
- Replies: 8
- Views: 11251
Hi,
I've put a few more DOS software disk images and PDF's on our main website. FanucSLD is there now.
Go to http://www.denford.co.uk/technical-support.asp
I'm hoping Mr Magoo can do some sort of guide as to how you create a DOS disk for your particular machine.
I've put a few more DOS software disk images and PDF's on our main website. FanucSLD is there now.
Go to http://www.denford.co.uk/technical-support.asp
I'm hoping Mr Magoo can do some sort of guide as to how you create a DOS disk for your particular machine.
- Fri 31 Mar , 2006 15:50 pm
- Forum: VR Milling - All Versions
- Topic: Circular interpolation in the z plane
- Replies: 1
- Views: 3993
I'm pretty sure G18 and G19 only works fully on the latest control cards which are the NextMove ST (with the green seven segment displays) along with VR Milling V5. You could try setting the expand Arcs to Lines option in parameters in VR Milling v5.xx this will break arcs and helicals into lots of ...
- Fri 31 Mar , 2006 15:27 pm
- Forum: VR Milling - All Versions
- Topic: Can we use the Desktop Tutor with VR Milling 5 ?
- Replies: 1
- Views: 3783
There are .keys files in C:\Program Files\Denford\VRMilling5 - or wherever the vrmilling5.exe is located. You select the COM port and the .KEYS file to use in setup->machine parameters in VR Milling 5 under Input / Output Devices I think you will want to use Fanuc0M.keys depending on the overlay you...
- Fri 31 Mar , 2006 15:03 pm
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1C5B
- Replies: 11
- Views: 11993
- Fri 31 Mar , 2006 15:02 pm
- Forum: VR Milling - All Versions
- Topic: Can we use the Desktop Tutor with VR Milling 5 ?
- Replies: 1
- Views: 3783
Can we use the Desktop Tutor with VR Milling 5 ?
Thanks, We now have control of the Triac and can control it using VR CNC Milling. A few other questions: - Are we able to use the Desktop Tutor to control the Triac at the same time as using the software? - There are several sample CNC programs supplied with VR CNC Milling, should we be able to run ...
- Fri 31 Mar , 2006 14:06 pm
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1C5B
- Replies: 11
- Views: 11993
- Fri 31 Mar , 2006 13:54 pm
- Forum: TechSoft 2D Design
- Topic: Techsoft Ver 2 will not connect to Denford machines
- Replies: 2
- Views: 13383
- Fri 31 Mar , 2006 13:47 pm
- Forum: Triac
- Topic: Traic ATC mill 1988 help
- Replies: 2
- Views: 4317
Can you supply some more details of the control/drive electronics, eg North East Electronics and the how its controlled (eg PC / BBC etc...)? Anyone else who can help you out will need to know this. I think its maybe too old to qualify for our Euro card upgrade route to enable smooth 3 axis interp, ...
- Fri 31 Mar , 2006 10:43 am
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1C5B
- Replies: 11
- Views: 11993
It can only be a problem with one of the following, we just need to eliminate them as best we can: Transmit RS232 cabling (as the recieve appears to be working) - check all wires are intact right from the PC, through the cabinet connectors and to the control card. The port on the PC, or on the contr...
- Fri 31 Mar , 2006 10:05 am
- Forum: User Stories / Projects / Courseware
- Topic: Pen Blank problems - taper alignment align error
- Replies: 1
- Views: 5973
Its sounds like the blanks are not being held in line . The centres of both ends holding the blanks must be in line, otherwise you will get tapered cutting. You should hold a part that you know is not tapered - maybe some quality 1" bar, and run a clock (dial test indictor) along the top and side of...
- Fri 31 Mar , 2006 9:11 am
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1C5B
- Replies: 11
- Views: 11993
Because its trying NextStep 5035, that tells me that you have the control type set to 7 If the firmware is 5035, then you use control type 7 If the firmware is above 5035 then it is control type 9 Download EasyUpgrader from here... When you install and run this, it will find your machine and tell us...
- Fri 31 Mar , 2006 9:03 am
- Forum: TechSoft 2D Design
- Topic: registration marks on 2D Design V2
- Replies: 3
- Views: 15958
- Thu 30 Mar , 2006 17:08 pm
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1C5B
- Replies: 11
- Views: 11993
Does your Triac rack-upgrade card have a USB connection ? If it does try that. Like I say, I got the exact same error when I tried control type 7 with only RS232 cable connected. OK with type 9. Try turning on debug mode and let us know what is happening: find VRMilling5.ini in: C:\Documents and Set...
- Thu 30 Mar , 2006 16:31 pm
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1C5B
- Replies: 11
- Views: 11993
Its to do with a problem I have located and fixed now in 5.13 (coming soon :wink: ) I have a feeling that the control type in: Setup -> machine parameters -> denny -> communications has changed to 7 because it couldn't find the control as type 9 at some time previously, the access violation though i...
- Thu 30 Mar , 2006 15:10 pm
- Forum: QuickCAM 3D/PRO/4D
- Topic: "Context Deactivation Failed" Error
- Replies: 1
- Views: 6120
Context errors are to do with OpenGL graphics card/driver errors. eg, could also appear as "context not created" 1. Make sure your graphics card driver is up to date. 2. Upload the latest version from our website www.denford.co.uk - latest versions have been fixed to work with the latest OpenGL vers...
- Thu 30 Mar , 2006 15:02 pm
- Forum: QuickCAM / LaserCAM 2D Design
- Topic: George and the Dragon
- Replies: 0
- Views: 3770
George and the Dragon
Make a cool weather vane with QuickCAM 2D
Download the MCM (QuickCAM/LaserCAM) file here:
http://www.denfordata.com/projectimages ... Dragon.MCM
Download the MCM (QuickCAM/LaserCAM) file here:
http://www.denfordata.com/projectimages ... Dragon.MCM
- Tue 28 Mar , 2006 15:26 pm
- Forum: Software
- Topic: Found a font convertor app for MillCAM designer
- Replies: 3
- Views: 15086
- Tue 28 Mar , 2006 14:37 pm
- Forum: QuickCAM 3D/PRO/4D
- Topic: Advanced F1 CO2 car import / manufacturing guide USA
- Replies: 1
- Views: 14317
Advanced F1 CO2 car import / manufacturing guide USA
Steve has done a great tutorial on machining a CO2 car using QuickCAM 3D (standard or Pro)
View the PDF here:
http://www.denfordata.com/projectimages ... import.pdf
(Right click and save Target as to download it)
View the PDF here:
http://www.denfordata.com/projectimages ... import.pdf
(Right click and save Target as to download it)