Search found 1428 matches

by Steve
Thu 01 Sep , 2022 15:38 pm
Forum: Cyclone
Topic: AC2/106 Spacer Drawing
Replies: 3
Views: 5019

Re: AC2/106 Spacer Drawing

please find attached drawings. The parts are no longer in stock.
by Steve
Wed 10 Aug , 2022 8:34 am
Forum: F1 / 4x4 / GT Racing In Schools
Topic: Technical Data Sheet F1 Model Block
Replies: 2
Views: 8848

Re: Technical Data Sheet F1 Model Block

All the data we have is shown on the data sheet. Unfortunatley this is all we have.
by Steve
Tue 19 Jul , 2022 9:40 am
Forum: Micromill / Microturn
Topic: (HELP NEEDED) MICROTURN/QUICK TURN 2
Replies: 1
Views: 3946

Re: (HELP NEEDED) MICROTURN/QUICK TURN 2

Hi The simulation always shows the cutting from the top so the tool library should not be edited
1.JPG
1.JPG (71.71 KiB) Viewed 3905 times
In Quick Tern 2D Design make sure you have the correct tool Library selected which will also create a program cutting from the front.
1.JPG
1.JPG (71.71 KiB) Viewed 3905 times
3.JPG
3.JPG (63.71 KiB) Viewed 3905 times
by Steve
Tue 31 May , 2022 12:51 pm
Forum: Cyclone
Topic: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen
Replies: 10
Views: 7803

Re: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen

Thanks for posting the solution.
by Steve
Tue 31 May , 2022 12:50 pm
Forum: Electronics
Topic: CPLD needs to be updating.
Replies: 1
Views: 4346

Re: CPLD needs to be updating.

Hi, Is the machine functioning correctly if so I would leave the firmware as it is. What model of machine do you have and what is the date of manufacture?
by Steve
Fri 06 May , 2022 9:04 am
Forum: VMC 1300
Topic: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
Replies: 3
Views: 4613

Re: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly

The tool should be pulled up tight in the taper of the spindle so there should be no movement once fitted. Could you remove a pull stud from a toolholder and check it fits in the taper correctly? All that could cause a tool fitted with the correct pull stud to be loose would be that the springs are ...
by Steve
Sat 05 Mar , 2022 19:51 pm
Forum: VersaLaser
Topic: How to replace mirrors 2 and 3 on versalaser
Replies: 8
Views: 18175

Re: How to replace mirrors 2 and 3 on versalaser

You would probably be able to see damage on the mirrors and Len’s if there is any.

A service on the laser may be worth doing. We could measure the laser power before the optics and through them.

The worst case would be you need a laser recharge but it would be worth doing.
by Steve
Mon 21 Feb , 2022 14:50 pm
Forum: Turn270
Topic: G91 on Turn 270 PRO
Replies: 1
Views: 3987

Re: G91 on Turn 270 PRO

Unfortunatly G91 is not supported in VR Turning.
The supported codes are listed in the help.

g codes.JPG
g codes.JPG (190.48 KiB) Viewed 3972 times
by Steve
Mon 21 Feb , 2022 14:33 pm
Forum: Novamill
Topic: Nova Mill mint version message
Replies: 9
Views: 8774

Re: Nova Mill mint version message

Thats great. Thanks for letting us know.
by Steve
Tue 15 Feb , 2022 9:53 am
Forum: Post Processors
Topic: Fusion 360 Post Processor
Replies: 0
Views: 5922

Fusion 360 Post Processor

The attached post processor for Fusion 360 was supplied by Simon Edwards of Ron Dearing UTC.
denford + 4th axis.zip
(9.1 KiB) Downloaded 363 times
by Steve
Thu 10 Feb , 2022 17:38 pm
Forum: Denford Classifieds
Topic: (SOLD) Deublin ltd pneumatic chuck for Mirac PC
Replies: 12
Views: 12933

Re: FOR SALE: Deublin ltd pneumatic chuck for Mirac PC

The chuck jaws are soft jaws designed to be machined to hold a specific bar size. You could still buy soft jaws for them.
by Steve
Thu 10 Feb , 2022 17:34 pm
Forum: Novamill
Topic: Nova Mill mint version message
Replies: 9
Views: 8774

Re: Nova Mill mint version message

hi give us a call when you are thinking of coming over. Ask for Martin or Steve.
by Steve
Thu 10 Feb , 2022 17:31 pm
Forum: Project Of The Week
Topic: Work Area
Replies: 6
Views: 8013

Re: Work Area

Hi Trevor, This post would have been better in the microrouter section on the forum https://www.denfordata.com/bb/viewforum.php?f=38 You could download the manual from there. It is possible to lower the motor mounting plate so the tools can get down to the bed. You can see the screws to adjust this ...
by Steve
Thu 10 Feb , 2022 17:19 pm
Forum: VR Turning - All Versions
Topic: Help with Viceroy Lathe
Replies: 1
Views: 4848

Re: Help with Viceroy Lathe

You may be better posting this in the Viceroy page on the forum.

Have you looked on that page?

https://www.denfordata.com/bb/viewforum.php?f=50
by Steve
Mon 07 Feb , 2022 9:57 am
Forum: Project Of The Week
Topic: Work Area
Replies: 6
Views: 8013

Re: Work Area

The table and travels are X 400 x Y200 x Z100mm
by Steve
Fri 04 Feb , 2022 12:17 pm
Forum: Micromill / Microturn
Topic: Micromill z axis jib
Replies: 1
Views: 4589

Re: Micromill z axis jib

by Steve
Fri 04 Feb , 2022 12:10 pm
Forum: Router 2600
Topic: Random toolpath deviation!
Replies: 4
Views: 5195

Re: Random toolpath deviation!

It does look like one of the slides may have stalled. Possibly a Retract in the Z axis. Vacuum down the machine and clean the leadscrews especially the Z axis. Spray the leadscrews with the silicone spray and leave to dry then retry the program but turn the feed override down and see if that improve...
by Steve
Fri 04 Feb , 2022 12:01 pm
Forum: Novamill
Topic: Nova Mill mint version message
Replies: 9
Views: 8774

Re: Nova Mill mint version message

As you are only located in Bradford could you bring the machine and computer to the factory in Brighouse We could take a look at it for you?