Search found 1250 matches
- Wed 22 Feb , 2006 14:57 pm
- Forum: Electronics
- Topic: How do i install my Nextmove card?
- Replies: 1
- Views: 3442
1. Turn off the mains supply to the machine 2. Ensure you are statically grounded to avoid any damage to the Nextmove board 3. Open the control box / side panel on the machine tool. 4. Locate the Denstep (Standard mount) Eurostep (Rack mount) card Rack Mounted Remove the RS232 cable from the Euroste...
- Wed 22 Feb , 2006 14:57 pm
- Forum: Electronics
- Topic: How do i install my Nextmove card?
- Replies: 1
- Views: 3442
How do i install my Nextmove card?
How do i install my Nextmove card?
- Wed 22 Feb , 2006 14:52 pm
- Forum: VR Milling - All Versions
- Topic: PC not detecting the Nextmove USB card
- Replies: 1
- Views: 3679
Search the VR Milling Ver 5 CD for the USB folder and install the Baldor USB drivers You need to get the Baldor USB device to appear in device manager in control panel of the PC first. Or power is not on to the Nextmove card, is the green 7 segment display illuminated, Or its not XP/2000 operating s...
- Wed 22 Feb , 2006 14:49 pm
- Forum: VR Milling - All Versions
- Topic: PC not detecting the Nextmove USB card
- Replies: 1
- Views: 3679
PC not detecting the Nextmove USB card
After installing the Nextmove card to the machine, and plugging it into the USB. I thought that the PC would auto detect that it has some sort of USB device plugged into it (XP) but this is not the case.
- Wed 22 Feb , 2006 14:46 pm
- Forum: Electronics
- Topic: Axis will not jog or home or jogs the wrong way
- Replies: 1
- Views: 3953
(Can be Faulty Drive, Loose wires on the axis plug and socket on the Denstep, Faulty motors) A. The datum limit switch on the axis may be faulty (i.e. dust ingress) Clean obstruction and press limit switch by hand and check for clicking noise, can also use electrical meter to check if a CHANGE OVER ...
- Wed 22 Feb , 2006 14:45 pm
- Forum: Electronics
- Topic: Axis will not jog or home or jogs the wrong way
- Replies: 1
- Views: 3953
Axis will not jog or home or jogs the wrong way
Axis will not jog or home or jogs the wrong way
- Mon 13 Feb , 2006 12:53 pm
- Forum: VR Milling - All Versions
- Topic: Ver Milling Ver 2/5 "Set XXX Link Function" error
- Replies: 1
- Views: 5609
Ver Milling Ver 2/5 "Set XXX Link Function" error
I get “Set XXX Link Function” on VR Milling ver 2 or 5
What does it mean ?
What does it mean ?
- Mon 13 Feb , 2006 12:50 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling Ver 2 “List Index Out of Bounds”
- Replies: 1
- Views: 4339
VR Milling Ver 2 “List Index Out of Bounds”
I get “List Index Out of Bounds” in VR Milling Ver 2.xx when accessing tooling / offsets
- Mon 13 Feb , 2006 12:46 pm
- Forum: VR Milling - All Versions
- Topic: "Move exceeds limits" error message
- Replies: 7
- Views: 9618
"Move exceeds limits" error message
1. If the material is located on the bed of the machine where it is physically impossible for the moves in the program to be reached. Reposition the work piece and reset the offsets 2. Spurious moves, if he as created the program via a CAD and CAM package he may have left in a line etc that should n...
- Mon 13 Feb , 2006 12:41 pm
- Forum: VR Milling - All Versions
- Topic: Router axes reversing slowly from datum switches
- Replies: 2
- Views: 5276
Router axes reversing slowly from datum switches
Q. Router axes reversing slowly from datum switches when homing
A. Clean any foreign matter i.e. dust / debris from the 3 datum micro switches and try to re home
A. Clean any foreign matter i.e. dust / debris from the 3 datum micro switches and try to re home