Videos on how to setup Lathe tooling
https://www.denfordata.com/downloads/Se ... 270Pro.zip
Search found 1428 matches
- Wed 22 Mar , 2023 11:32 am
- Forum: VR Turning - All Versions
- Topic: HOW DO I SET TOOL OFFSETS?
- Replies: 4
- Views: 19272
- Fri 10 Feb , 2023 12:41 pm
- Forum: Router 2600
- Topic: New machine - how to physically move the tool?
- Replies: 5
- Views: 11168
Re: New machine - how to physically move the tool?
I would check that all the fuses are OK.
Possibly you dont have the Axis motor power.
Possibly you dont have the Axis motor power.
- Mon 06 Feb , 2023 18:33 pm
- Forum: Router 2600
- Topic: Router 2600 Pro - Machine Connection Problem
- Replies: 5
- Views: 8037
Re: Router 2600 Pro - Machine Connection Problem
Have you downloaded the latest VR Milling and used the 64 bit driver on the CD?
- Thu 05 Jan , 2023 16:32 pm
- Forum: Triac
- Topic: Triac Y axis error after G28/Toolchange
- Replies: 2
- Views: 4681
Re: Triac Y axis error after G28/Toolchange
It sounds like the Y axis is stalling at some point and loosing position.
Can you try running the program with the feed override set lower?
Check for any obstructions that may be restricting axis motion.
Has the machine been lubricated recently?
Can you try running the program with the feed override set lower?
Check for any obstructions that may be restricting axis motion.
Has the machine been lubricated recently?
- Wed 04 Jan , 2023 14:29 pm
- Forum: StarMill
- Topic: Spindle Drawings
- Replies: 1
- Views: 4708
Re: Spindle Drawings
Hi We dont have the starmill drawings any more though I thought the spindle was the same as the Novamill?
The Novamill spindle is part number RM1/715A drawing attached though we no longer have any stock.
The Novamill spindle is part number RM1/715A drawing attached though we no longer have any stock.
- Mon 19 Dec , 2022 17:31 pm
- Forum: VMC 1300
- Topic: Seeking lubrication clarity
- Replies: 3
- Views: 4919
Re: Seeking lubrication clarity
They will be packed from new and will probably last for years without lubrication.
- Mon 19 Dec , 2022 17:27 pm
- Forum: NovaTurn
- Topic: NovaTurn - issues with toolpost, spindle motor and encoder
- Replies: 1
- Views: 4540
Re: NovaTurn - issues with toolpost, spindle motor and encoder
Can you confirm the RPM on the chuck using an external Tacho? I think the first thing to do is actually check the actual speed and compare to the encoder. You say : I've checked the board output voltage and it's ~150 V @ 1150RPM and the encoder is saying the spindle is running at 3718 RPM The spindl...
- Mon 12 Dec , 2022 14:22 pm
- Forum: VMC 1300
- Topic: Seeking lubrication clarity
- Replies: 3
- Views: 4919
Re: Seeking lubrication clarity
Its not easy to see so took some photos from machine assemblies. The bearings are in the same place by the motor mounts.
- Mon 05 Dec , 2022 14:25 pm
- Forum: VR Milling - All Versions
- Topic: Can I set a smaller step jog increment as default?
- Replies: 1
- Views: 4914
Re: Can I set a smaller step jog increment as default?
Hi,
I believe this is hard coded so its not somthing that you can set yourself.
I believe this is hard coded so its not somthing that you can set yourself.
- Thu 01 Dec , 2022 16:33 pm
- Forum: Triac
- Topic: Emergency Stop Alarm (Relay)
- Replies: 3
- Views: 5752
Re: Emergency Stop Alarm (Relay)
Can you leyt us know the model of Triac you have so we can check the wiring diagrams to see what is in the E-STOP circuit.
Have you tried pressing and releasing the E-stop button?
Have you got Air on the machine if so is the pressure OK?
Have you tried pressing and releasing the E-stop button?
Have you got Air on the machine if so is the pressure OK?
- Fri 14 Oct , 2022 10:56 am
- Forum: MicroRouter
- Topic: Microrouter V5 settings
- Replies: 2
- Views: 5469
Re: Microrouter V5 settings
The X axis leadscrews will be 1/2" pitch 12.7mm and the Y and Z have 10mm pitch screws. We would have driven the motors in half step mode with 400 half steps / Rev
Does the machine have a seperate stepper drive fitted for the axes if so the steps / Rev could be set there.
Does the machine have a seperate stepper drive fitted for the axes if so the steps / Rev could be set there.
- Fri 14 Oct , 2022 10:51 am
- Forum: Electronics
- Topic: mint I/O data collection
- Replies: 3
- Views: 6763
Re: mint I/O data collection
Hi,
I dont think think that this is somthing like this could be done easily or without a lot of development work.
Is this somthing you would be willing to pay to have developed?
I dont think think that this is somthing like this could be done easily or without a lot of development work.
Is this somthing you would be willing to pay to have developed?
- Thu 06 Oct , 2022 13:10 pm
- Forum: NovaTurn
- Topic: denford novaturn
- Replies: 10
- Views: 9699
Re: denford novaturn
In answer to the last two posts here. The cross check error on the control cards are only carried out on machines built since 2009. If an older machine is trying to cary this out then the firmware on the control card is too new and must have been updated or you must have the wrong machine selected i...
- Thu 06 Oct , 2022 12:24 pm
- Forum: Triac
- Topic: spindle bearing coming loose
- Replies: 5
- Views: 7851
Re: spindle bearing coming loose
Is it the Locknut BI00186H that is coming loose?
We changed the style fitted when we designed the VMC1300. The new part is BI00186HH which has a spring steel locking plate on top. This could be fitted to your machine.
These are priced at £19
We changed the style fitted when we designed the VMC1300. The new part is BI00186HH which has a spring steel locking plate on top. This could be fitted to your machine.
These are priced at £19
- Tue 04 Oct , 2022 11:04 am
- Forum: Triac
- Topic: spindle bearing coming loose
- Replies: 5
- Views: 7851
Re: spindle bearing coming loose
Is this the tool becoming loose in the spindle taper? There should only be 44 washers in the spring stack and these are secured by the lock nut at the top of the spindle. See the post attached as the spindle arangement should be the same as the 1300. The locknut is secured with a grub screw so shoul...
- Fri 23 Sep , 2022 9:53 am
- Forum: Electronics
- Topic: Novamill stepper driver issue
- Replies: 1
- Views: 5369
Re: Novamill stepper driver issue
I would try switching the drive to the motos by plgging the Y into the X and the X into the Y on the control card. You may have to remove the black key pins from the connector to do this. https://www.denfordata.com/bb/viewtopic.php?f=54&t=1627. Then by pressing the Y jog the X will move using the Y ...
- Wed 07 Sep , 2022 14:40 pm
- Forum: Compact 1000
- Topic: Error connecting to Router
- Replies: 2
- Views: 8945
Re: Error connecting to Router
The 18V is rectified to produce the 24V DC logic which powers on the controller and the Light.
- Thu 01 Sep , 2022 16:03 pm
- Forum: Electronics
- Topic: Novamill RPM not changing
- Replies: 3
- Views: 6360
Re: Novamill RPM not changing
The sprint drive will have a 0V 10V and analog in terminal. If you connected a pot to this you would then be able to control the speed from the pot proving thet the drive is working. Take care as the Sprint is not isolated but the analog out of the nextmove is iscolated and should change between 0-1...
- Thu 01 Sep , 2022 15:44 pm
- Forum: Router 2600
- Topic: Tee slot dimensions
- Replies: 1
- Views: 4801
Re: Tee slot dimensions
YES
Travel is 400mm in Y and slots are 40mm apart.
Travel is 400mm in Y and slots are 40mm apart.
- Thu 01 Sep , 2022 15:42 pm
- Forum: Electronics
- Topic: Novamill Sprint spindle drive 12v+ source
- Replies: 1
- Views: 5215
Re: Novamill Sprint spindle drive 12v+ source
The sprint drive may be unisolated so you must be carfull connecting it to the supply. The 0-10V from the BAldor control card is iscolated