The PCB Engraver was never added to EasyUgrader & the PCB software does not look for it so no it does not need to be programmed.
You can put the machine serial number in if you want but it`s not required to run.
Search found 1898 matches
- Wed 03 Apr , 2024 14:12 pm
- Forum: PCB Engraver
- Topic: PCB engraver nextmove programming
- Replies: 2
- Views: 133
- Tue 12 Mar , 2024 12:57 pm
- Forum: Cyclone
- Topic: Rigid Tapping Issue on Harrison Tu150 Fanuc OT-A
- Replies: 2
- Views: 312
Re: Rigid Tapping Issue on Harrison Tu150 Fanuc OT-A
It is possible to do rigid tapping on a TU150 fitted with an OT-A control.
We only fitted spindle speed encoder & not a position encoder.
We only fitted spindle speed encoder & not a position encoder.
- Thu 15 Feb , 2024 9:23 am
- Forum: Triac
- Topic: Triac vmc draw bar
- Replies: 5
- Views: 765
- Tue 13 Feb , 2024 9:52 am
- Forum: Downloads
- Topic: Machine plans help
- Replies: 1
- Views: 582
Re: Machine plans help
Can you post a copy of the program please.
It sounds like it will be due to the depth of cut with the second pass slightly deeper.
It sounds like it will be due to the depth of cut with the second pass slightly deeper.
- Thu 08 Feb , 2024 11:46 am
- Forum: Novamill
- Topic: Issue with old Novamill and VR Milling 5
- Replies: 3
- Views: 329
Re: Issue with old Novamill and VR Milling 5
It may be down to the internal RS 232 lead.
It would be best to make up a 9 way to 9 way lead to connect the machine directly to the computer.
viewtopic.php?t=231
It would be best to make up a 9 way to 9 way lead to connect the machine directly to the computer.
viewtopic.php?t=231
- Mon 29 Jan , 2024 10:01 am
- Forum: Software
- Topic: Spindle control
- Replies: 3
- Views: 825
Re: Spindle control
What machine do you have?
I am not aware of the 6000 Diagnostics.
Have you set Diagnostic 453 bit 0 to 1?
I am not aware of the 6000 Diagnostics.
Have you set Diagnostic 453 bit 0 to 1?
- Thu 25 Jan , 2024 12:10 pm
- Forum: Triac
- Topic: Triac vmc draw bar
- Replies: 5
- Views: 765
Re: Triac vmc draw bar
You will need to adjust the tension as per the attached link with a tool in the spindle.
viewtopic.php?f=51&t=6226&p=25626&hilit ... der#p25305
viewtopic.php?f=51&t=6226&p=25626&hilit ... der#p25305
- Tue 23 Jan , 2024 8:59 am
- Forum: Software
- Topic: Spindle control
- Replies: 3
- Views: 825
Re: Spindle control
Have you installed the 450 Diagnostis?
- Wed 03 Jan , 2024 14:04 pm
- Forum: NovaTurn
- Topic: Novaturn. M4 comand??
- Replies: 2
- Views: 1197
Re: Novaturn. M4 comand??
Hi David
The spindle reverse was never an option on the Novaturn.
The M3 & M4 commands will both run the same way.
The spindle reverse was never an option on the Novaturn.
The M3 & M4 commands will both run the same way.
Re: Z issues
I presumed you still had the original control fitted.
I would look at keeping the axis drive signals as far away form the spindle drive & spindle motor wires as possible.
I would look at keeping the axis drive signals as far away form the spindle drive & spindle motor wires as possible.
Re: Z issues
Can you post a picture of the inside of the electrical cabinet. I presume its a rack mounted control & drive fitted.
- Mon 27 Nov , 2023 9:38 am
- Forum: MicroRouter
- Topic: lubrication/maintenance
- Replies: 1
- Views: 7225
Re: lubrication/maintenance
Can you supply the serial number & date of manufacture please.
- Thu 26 Oct , 2023 10:02 am
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
We are in Brighouse, HD6 1QF
We would not be able to test it with it being converted to Mach 3.
We would not be able to test it with it being converted to Mach 3.
- Wed 25 Oct , 2023 13:02 pm
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
Yes that's a distance from us.
- Tue 24 Oct , 2023 15:00 pm
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
Where are you located?
- Tue 24 Oct , 2023 10:54 am
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
It would be unusual for the E-Stop switch to short out.
Do you have a electrical meter you can use to test the 24Volts DC supply & see if it is being dragged down?
Do you have a electrical meter you can use to test the 24Volts DC supply & see if it is being dragged down?
- Mon 23 Oct , 2023 15:18 pm
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
It does look like the 24volts DC is being shorted out by something.
With it being updated to Nach 3 I am not sure where to suggest to proceed.
Did you upgrade the machine yourself?
With it being updated to Nach 3 I am not sure where to suggest to proceed.
Did you upgrade the machine yourself?
- Thu 19 Oct , 2023 16:35 pm
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
Yes if it is the coil causing the issue.
It could also be the zero speed output from the spindle drive.
Se how you get on.
It could also be the zero speed output from the spindle drive.
Se how you get on.
- Thu 19 Oct , 2023 9:56 am
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
If you remove wire number 90 from the GIR that will disconnect the guard solenoid.
It may also be worth checking the diode fitted inside the Guardmaster switch.
It may also be worth checking the diode fitted inside the Guardmaster switch.
- Wed 18 Oct , 2023 8:19 am
- Forum: Electronics
- Topic: Interlock is tripping.
- Replies: 17
- Views: 43837
Re: Interlock is tripping.
It sounds like something may be shorting out the 24Volts DC.
It may be worth disconnecting one of the wires going to the guard lock solenoid.
It may be worth disconnecting one of the wires going to the guard lock solenoid.