Using Easy Upgrader the card can be used for any machine and will update any machine running without a USB port.
Replacing a Denstep controller performance would be much improved.
.
Search found 1428 matches
- Wed 27 Mar , 2024 8:05 am
- Forum: Denford Classifieds
- Topic: Denford Nextmove ST USB controller
- Replies: 2
- Views: 841
- Wed 27 Mar , 2024 8:01 am
- Forum: Software
- Topic: Some software questions
- Replies: 1
- Views: 804
Re: Some software questions
Hi, The machine RS232 cable will be detIle on the forum. I would also check the EPROM version you have in the machine. If the EPROM is for DOS the software can be downloaded for free if the EPROM is for VR Turning you would have to purchase software from Denford. The serial cable for US machines is ...
- Wed 06 Dec , 2023 9:55 am
- Forum: Turn270
- Topic: Tapered thread ?
- Replies: 2
- Views: 9202
Re: Tapered thread ?
Hi,
The Turn270PRO will not cut does not have a command for taper thread cutting.
The spindle only runs in reverse.
The Turn270PRO will not cut does not have a command for taper thread cutting.
The spindle only runs in reverse.
- Mon 20 Nov , 2023 12:20 pm
- Forum: Triac
- Topic: spindle bearing coming loose
- Replies: 5
- Views: 8034
Re: spindle bearing coming loose
Just call Denford or email Sales@denford.co.uk
Locknut BI00186HH
The price has increased a bit but they are in stock
Locknut BI00186HH
The price has increased a bit but they are in stock
- Thu 09 Nov , 2023 18:19 pm
- Forum: StarMill
- Topic: Starmill Headstock Drawings
- Replies: 1
- Views: 6410
Re: Starmill Headstock Drawings
Headstock Drawing
- Wed 08 Nov , 2023 17:38 pm
- Forum: F1 / 4x4 / GT Racing In Schools
- Topic: Tether Pully Guide Assembly
- Replies: 0
- Views: 27901
Tether Pully Guide Assembly
This file can be downloaded to produce a pully system to tension the tether guide. pulley.jpg PULLEY BRACKET (9.1.18).stl The STL can be 3D Printed and one of the F1 in school axles can be used as a shaft for the pulley The pulleys can be purchased through Rapid Electronics https://www.rapidonline.c...
- Mon 23 Oct , 2023 13:52 pm
- Forum: MicroRouter
- Topic: Microrouter v5 ns pro usb
- Replies: 1
- Views: 5742
Re: Microrouter v5 ns pro usb
It sounds as if the machine does not have microstepping drives/
Post a picture of the electrical panel and the serial number plate.
Post a picture of the electrical panel and the serial number plate.
- Fri 13 Oct , 2023 12:16 pm
- Forum: QuickTURN 2D Design
- Topic: Including a centre drill hole in the design
- Replies: 1
- Views: 13856
Re: Including a centre drill hole in the design
The center drill has a 2mm tip but 5mm shank so to be used the hole must be drawn as 5mm.
If you set the depth to 2mm it will only use the start of the centre drill.
It would then use the 5mm drill to drill 2mm deep also unless you dissablesd it in the tool library.
If you set the depth to 2mm it will only use the start of the centre drill.
It would then use the 5mm drill to drill 2mm deep also unless you dissablesd it in the tool library.
- Mon 02 Oct , 2023 8:54 am
- Forum: User Stories / Projects / Courseware
- Topic: TOOL SETTING GAUGE FOR ROUTER
- Replies: 0
- Views: 29421
TOOL SETTING GAUGE FOR ROUTER
A usefull setting gauge for router tooling if not using the recommended tool holders.
Set tool one on the surface of the material with a Zero offset and other tools have an offset of either -20, -25mm or -30mm.
Set tool one on the surface of the material with a Zero offset and other tools have an offset of either -20, -25mm or -30mm.
- Tue 19 Sep , 2023 15:11 pm
- Forum: Micromill / Microturn
- Topic: Micromill Spindle Problem
- Replies: 2
- Views: 7367
Re: Micromill Spindle Problem
Hi, What spindle speed were you trying to run at? If the speed request was very slow it may not have enough grunt to start rotating. Set the speed to say 1500RPM with the override to 100% and see if there is any difference. It could also be an issue with the spindle analogue. The light dimming would...
- Mon 21 Aug , 2023 15:34 pm
- Forum: Cyclone
- Topic: BARRUFALDI TOE80,
- Replies: 11
- Views: 10164
Re: BARRUFALDI TOE80,
Denford manufacture thier own turret for the current machines which are not retrofitable onto the Cyclone.
- Fri 04 Aug , 2023 13:20 pm
- Forum: NovaTurn
- Topic: HELP CONNECTING VR TURNING TO NOVATURN NS
- Replies: 8
- Views: 9062
Re: HELP CONNECTING VR TURNING TO NOVATURN NS
Hi, The serial cable you are using does not look to be the correct one. It should be a Black Lindy cable and is not an off the shelf serial cable. The cable should be a BI01812GG https://www.denfordata.com/bb/viewtopic.php?f=54&t=765&p=23012&hilit=serial+rs232#p23012 https://www.denfordata.com/bb/vi...
- Tue 18 Jul , 2023 16:02 pm
- Forum: Electronics
- Topic: Which EPROM version in a DenStep card?
- Replies: 16
- Views: 31218
Re: Which EPROM version in a DenStep card?
Hi Max,
I dont think we have any Hex files now.
I dont think we have any Hex files now.
- Thu 06 Jul , 2023 15:31 pm
- Forum: F1 / 4x4 / GT Racing In Schools
- Topic: F1 in Schools - Ethernet IP address
- Replies: 1
- Views: 6108
Re: F1 in Schools - Ethernet IP address
The IP address will be displayed at the top left of the start gate screen.
Using an ethernet cable is covered in the race system manual from page 18.
I have attached the manual
Using an ethernet cable is covered in the race system manual from page 18.
I have attached the manual
- Fri 05 May , 2023 9:37 am
- Forum: Orac
- Topic: Cutting left hand threads
- Replies: 2
- Views: 6493
Re: Cutting left hand threads
I cant see why it would not be possible.
The thread routine would have to cut from the chuck towards the tailstock to keep the spindle direction the same and use the same tool.
Quick Turn 2D writes threading routines this way for LH threads.
The thread routine would have to cut from the chuck towards the tailstock to keep the spindle direction the same and use the same tool.
Quick Turn 2D writes threading routines this way for LH threads.
- Tue 11 Apr , 2023 15:48 pm
- Forum: Micromill / Microturn
- Topic: I got a MicroMill and Microturn last week.
- Replies: 11
- Views: 18256
Re: I got a MicroMill and Microturn last week.
The software is available from Denford. Contact sales@denford.co.uk
- Tue 28 Mar , 2023 12:57 pm
- Forum: Turn270
- Topic: How to setup a Turn270PRO tooling and workshift
- Replies: 5
- Views: 10735
Re: How to setup a Turn270PRO tooling and workshift
Thanks for letting me know. I realised its a large file but the order of setting things made it worth storing this way.
- Thu 23 Mar , 2023 17:06 pm
- Forum: Micromill / Microturn
- Topic: TechTurn
- Replies: 3
- Views: 6647
Re: TechTurn
Possibly an American made machine.
- Thu 23 Mar , 2023 17:00 pm
- Forum: Turn270
- Topic: How to setup a Turn270PRO tooling and workshift
- Replies: 5
- Views: 10735
Re: How to setup a Turn270PRO tooling and workshift
Tested the download and it worked for me.
- Wed 22 Mar , 2023 11:35 am
- Forum: Turn270
- Topic: How to setup a Turn270PRO tooling and workshift
- Replies: 5
- Views: 10735
How to setup a Turn270PRO tooling and workshift
Attached is a Powerpoint download showing how to configure the software and set offsets for a Turn270PRO. This is a video record of setting up the machines while holding a phone in one hand so a bit shakey but good content Videos on how to setup Lathe tooling https://www.denfordata.com/downloads/Set...