Search found 11 matches

by jeremydraper
Wed 01 Jul , 2020 19:58 pm
Forum: Triac
Topic: Denford Triac maybe selling
Replies: 0
Views: 6452

Denford Triac maybe selling

Hi
I'm considering selling my Denford Triac.
I have recently moved and sadly do not have the room, it is located south Midlands.
If anyone is interested let me know.
07847893603
by jeremydraper
Sun 23 Jun , 2019 19:47 pm
Forum: Triac
Topic: accuracy
Replies: 1
Views: 3561

accuracy

Hi,
How accurate is my Denford Triac ?

I would like to fit a high speed spindle so I can do engraving.

I have been asked what accuracy can I hold on my machiner but I am unsure what to reply.
by jeremydraper
Sun 14 Oct , 2018 0:13 am
Forum: Software
Topic: Pencil milling quickcam pro
Replies: 1
Views: 4025

Pencil milling quickcam pro

In quickcam pro some of the options are greyed out in the toolpaths, is it possible to change these ?
by jeremydraper
Thu 20 Sep , 2018 8:32 am
Forum: Triac
Topic: vrmilling and denford triac
Replies: 0
Views: 3700

vrmilling and denford triac

Hi,
When I run my Denford Triac from vrmilling it does not apply the tooling data diameter to the programme, I have entered in tool position 1 the diameter 10 mm but when I change that 10mm to change hole size nothing happens.
by jeremydraper
Wed 19 Sep , 2018 20:55 pm
Forum: VR Milling - All Versions
Topic: Tool diameter and offsets
Replies: 1
Views: 7271

Tool diameter and offsets

I have opened up a hole to diameter 20mm but I want it to measure 20.05 mm, I know I could redraw this or alter the code to make hole slightly larger.
I have tried changing tool diameter in tool offsets but this does not do anything, I must be doing something wrong, please help.
by jeremydraper
Tue 18 Sep , 2018 22:57 pm
Forum: Other CAD CAM and CNC
Topic: Fusion 360
Replies: 5
Views: 16616

Re: Fusion 360

I have done some good milling using this fusion 360 software on my denford triac, The post processor has only one quirk where it sends the vrmilling virtual machine table off the screen, but delete 1 line and its all good. This is so far the easiest software outside of vr milling and quick cam pro t...
by jeremydraper
Sun 16 Sep , 2018 19:49 pm
Forum: Triac
Topic: Triac Spindle stopped working
Replies: 3
Views: 4376

Re: Triac Spindle stopped working

Thanks I have fixed it, it was a 15 amp fuse at the topright part of the cabinet, thanks so much for your help
by jeremydraper
Sun 16 Sep , 2018 10:43 am
Forum: Triac
Topic: Triac Spindle stopped working
Replies: 3
Views: 4376

Re: Triac Spindle stopped working

I have only checked the fuse at top left, think it was f1, is it easy to find fuse on the speed controller not sure where to look.
by jeremydraper
Sat 15 Sep , 2018 23:47 pm
Forum: Triac
Topic: Triac Spindle stopped working
Replies: 3
Views: 4376

Triac Spindle stopped working

Hi,
My Triac spindle stopped working after diving the drill into workpiece.
I have checked fuse and it is ok.
There is a number 8 on displayi power supply box.
Relay clicks when I start the spindle motor but spindle does nothing.
It has been conveted to Usb.
Any help would be great.
by jeremydraper
Mon 10 Sep , 2018 16:27 pm
Forum: Triac
Topic: Denford Triac Spindle Motor
Replies: 2
Views: 3802

Re: Denford Triac Spindle Motor

Thanks for the reply I am going for the Kress with er 16 collets

https://www.ebay.co.uk/itm/Milling-Moto ... Swn4VbfTLA
by jeremydraper
Tue 28 Aug , 2018 16:00 pm
Forum: Triac
Topic: Denford Triac Spindle Motor
Replies: 2
Views: 3802

Denford Triac Spindle Motor

Hi, I have a Denford Triac, I would like to use it with a 0.8 mm slot drill/end mill to cut a 0.5 mm deep feature in Silver. My choices as I see it are, 1. Attach a fast spindle motor on the side like a die grinder 2. Change the pulley ratio on the existing spindle to increase rpm closer to desired ...