Search found 5 matches

by jscheminger
Fri 13 Apr , 2018 19:51 pm
Forum: Post Processors
Topic: HSM PRO CAM - Post Processing TURN 270 PRO
Replies: 7
Views: 13950

Re: HSM PRO CAM - Post Processing TURN 270 PRO

Final follow-up - Was able to get FANUC g-code working with a couple of minor modifications - codes G18 and G54 are generated but appear unnecessary; and the output code does not include a tool change command in front of the tool number string. Thanks again for the list of used codes - it proved ver...
by jscheminger
Fri 13 Apr , 2018 14:10 pm
Forum: Post Processors
Topic: HSM PRO CAM - Post Processing TURN 270 PRO
Replies: 7
Views: 13950

Re: HSM PRO CAM - Post Processing TURN 270 PRO

Thanks Martin - very helpful.

I'm comparing g-code outputs now from HSM vs. VRTurn for part reproduced in both.

Jeff
by jscheminger
Thu 12 Apr , 2018 19:49 pm
Forum: Post Processors
Topic: HSM PRO CAM - Post Processing TURN 270 PRO
Replies: 7
Views: 13950

Re: HSM PRO CAM - Post Processing TURN 270 PRO

Hi Jeff Try using the Fanuc output. It's just standard G & M codes. Hi Martin - Posted with FANUC (and HAAS) and have been fighting through some errors. Is there a list of G-Codes that are good to use? I'm thinking that the post uses some G commands that are not supported. Here are the first few li...
by jscheminger
Wed 11 Apr , 2018 18:33 pm
Forum: Post Processors
Topic: HSM PRO CAM - Post Processing TURN 270 PRO
Replies: 7
Views: 13950

HSM PRO CAM - Post Processing TURN 270 PRO

Hoping to find a post that will let me use AUtodesk Inventor/HSMPro to my new TURN 270 Pro with tool change. Any thoughts on a compatible machine? I can output to FANUC, HAAs, Heidenhain, proLIGHT, ProtoTRAK, Tormach, Siemens, OKUMA, FAGOR, GSK. Also can adjust the configuration on any of these... T...
by jscheminger
Thu 21 May , 2015 12:39 pm
Forum: Triac
Topic: TRIAC Relay input/output
Replies: 0
Views: 3013

TRIAC Relay input/output

Have 1995 vintage TRIAC without tool changer. Trying to automate a feed and looking for relay or contact in/out to initiate cycle from a robot feed.
Thanks,
Jeff