Search found 10 matches

by bjornove
Mon 13 Jun , 2022 22:13 pm
Forum: Software
Topic: Right software/post prosessor fpr Triac Fanuc 0m-b
Replies: 0
Views: 4871

Right software/post prosessor fpr Triac Fanuc 0m-b

Hi i need a little help with determin which pc software for program transfer and possible dripfeeding. can't seem to find the correct one in denford software libary. have tried FANUCM and TRIAC dos software for transfer the files. the diffrent programs handles G-codes and -Mcodes diffrentely. soooo ...
by bjornove
Tue 18 Jan , 2022 18:48 pm
Forum: Electronics
Topic: Triac Fanuc - ATC 1989
Replies: 0
Views: 5098

Triac Fanuc - ATC 1989

Hi have a issue, after some troubleshooting , i have found out that most of my misery with the Mill, goes back to a Controller Card with intermitting faults. where some key functions not working. i was thinking of changing this card. but i'm at loss for which one to get. since its a fairly old machi...
by bjornove
Thu 13 Feb , 2020 23:22 pm
Forum: Triac
Topic: PWE not changing
Replies: 3
Views: 4527

Re: PWE not changing

I got to change the PWE, it was the ATC that had a hidden fault, that didnt show as an alarm. Just to check the g127.5 is a diagnostic not a parameter setting?? Tried to change the diag 127 from 00000100 to 00010000, but after pressing input nothing changed?? Any thoughts?? The mdi singel part i can...
by bjornove
Wed 05 Feb , 2020 20:20 pm
Forum: Triac
Topic: PWE not changing
Replies: 3
Views: 4527

Re: PWE not changing

no, it dosent matter wich mode i'm in. is there anyway to block for writing other than key??
by bjornove
Sun 02 Feb , 2020 17:21 pm
Forum: Triac
Topic: PWE not changing
Replies: 3
Views: 4527

PWE not changing

Hey i have trouble changing the PWE parameter. i have put the "Program Lock Key" to off,put the machine in "MDI" mode and i have even tried to put the Emergency button in to se if that helps. but nothing. is there anything im missing?? is there another parameter i can change. the reason is that i wa...
by bjornove
Tue 24 Feb , 2015 22:37 pm
Forum: VR Milling - All Versions
Topic: QuickCam 3D VR milling v5 on Triac fanuc OM-B
Replies: 1
Views: 5484

QuickCam 3D VR milling v5 on Triac fanuc OM-B

Hey i am having bit of a headache with a old Triac Fanuc- OM-B machine from 1988ish. i have tried using EdgeCam to send cnc codes, but i seems that the post processor ain't right. it says that i am using a wrong code. tried sevreal driffrent set ups, but haven't got any further. so what i am wonderi...
by bjornove
Tue 24 Feb , 2015 22:37 pm
Forum: QuickCAM 3D/PRO/4D
Topic: QuickCam 3D VR milling v5 on Triac fanuc OM-B
Replies: 1
Views: 8919

QuickCam 3D VR milling v5 on Triac fanuc OM-B

Hey i am having bit of a headache with a old Triac Fanuc- OM-B machine from 1988ish. i have tried using EdgeCam to send cnc codes, but i seems that the post processor ain't right. it says that i am using a wrong code. tried sevreal driffrent set ups, but haven't got any further. so what i am wonderi...
by bjornove
Wed 21 Jan , 2015 19:26 pm
Forum: Triac
Topic: Triac fanuc 0M-B atc and parameter problems
Replies: 2
Views: 7555

Re: Triac fanuc 0M-B atc and parameter problems

hello and thank you for the reply since i posted this, i found out what was bothering the M06 command. it was the missing parameter on ATC. after telling the machine it has an ATC the problem went away. the issue i have now is that is that the ATC won't stop turning, most likely because of bad senso...
by bjornove
Tue 12 Aug , 2014 9:50 am
Forum: Machines
Topic: Triac fanuc 0M-B atc and parameter problems
Replies: 0
Views: 11056

Triac fanuc 0M-B atc and parameter problems

hello i have a Triac Fanuc 0M-B machine bought the machine used from at school that bought it from an old workshop. i have read through most of the topics on this site that has similar problems witout finding any solutions. the problem i am having, is that the machine stops at M06 command when i am ...
by bjornove
Mon 11 Aug , 2014 10:39 am
Forum: Triac
Topic: Triac fanuc 0M-B atc and parameter problems
Replies: 2
Views: 7555

Triac fanuc 0M-B atc and parameter problems

hello i have a Triac Fanuc 0M-B machine bought the machine used from at school that bought it from an old workshop. i have read through most of the topics on this site that has similar problems witout finding any solutions. the problem i am having, is that the machine stops at M06 command when i am ...