Hi all.
Is there an accepted "close enough" approximation to use for cutting the backplate thread on an all-metric machine ?
Long-term a set of translation gears and a banjo are on the cards, but not just yet...
Thanks,
Youra.
Search found 34 matches
- Mon 17 Sep , 2018 18:46 pm
- Forum: Viceroy
- Topic: Backplate thread?
- Replies: 5
- Views: 6514
- Sun 10 Jun , 2018 18:41 pm
- Forum: Viceroy
- Topic: Viceroy bits on eBay
- Replies: 0
- Views: 3645
Viceroy bits on eBay
This chap has some Viceroy bits - they look to me as though for some of the older, and possibly imperial versions. https://www.ebay.co.uk/sch/bobs1845/m.html for example: https://www.ebay.co.uk/itm/VARIOUS-LATHE-PARTS/352376412483 https://www.ebay.co.uk/itm/LATHE-PART/352376412468 https://www.ebay.c...
- Thu 08 Mar , 2018 23:36 pm
- Forum: Viceroy
- Topic: 280 with separate carriage feed drive.
- Replies: 2
- Views: 4092
280 with separate carriage feed drive.
A couple of months ago I came across a this picture on the website of a machinery dealer - can't unfortunately now remember which. Has anyone seen this sort of feed powering arrangement on a Viceroy before? Well known (in principle) from some other lathes - Hardinge in particular with the motor on t...
- Thu 08 Mar , 2018 23:30 pm
- Forum: Viceroy
- Topic: D1-3 camlock chuck and drive plate for sale.
- Replies: 3
- Views: 5706
Re: D1-3 camlock chuck and drive plate for sale.
Both items gone I'm afraid..
- Thu 26 Oct , 2017 18:16 pm
- Forum: Viceroy
- Topic: D1-3 camlock chuck and drive plate for sale.
- Replies: 3
- Views: 5706
D1-3 camlock chuck and drive plate for sale.
Hi all With my 250 came a couple of items that really ought to go with a 280 with a D1-3 camlock spindle fitting: 1- A 125mm (not 5") 3-Jaw Burnerd chuck, to which someone had actually fitted a 1.5x8tpi screw backplate. The backplate can come with the chuck if wanted, but the chuck I guess is mostly...
- Sat 19 Nov , 2016 21:44 pm
- Forum: Viceroy
- Topic: Half nut adjustment - how is it done?
- Replies: 2
- Views: 4143
Re: Half nut adjustment - how is it done?
John, all, Indeed probably not assembled correctly - I've stripped back the offending parts, double checked that the correct ground-to-size-on-factory-assembly washers were in the correct locations, and re-assembled. This time - despite all being as far as I can tell exactly the same, everything fit...
- Thu 17 Nov , 2016 23:27 pm
- Forum: Viceroy
- Topic: Half nut adjustment - how is it done?
- Replies: 2
- Views: 4143
Half nut adjustment - how is it done?
Hi all. I'm pretty well done putting back together my 250 apron after deciding that it needed a good seeing-to - one problem in particular was that the bottom right plastic push-rivet that held the aluminium decal plate on leaked oil and the apron would never stay full - that's now been replaced by ...
- Thu 03 Nov , 2016 0:04 am
- Forum: Viceroy
- Topic: Apron Removal from a Synchro 280
- Replies: 31
- Views: 29499
Re: Apron Removal from a Synchro 280
And many thanks from me to Andy B for that apron drawing - it looks identical to my 250 apron, and I was wondering exactly where the two washers I had left over had come from.....
Youra.
Youra.
- Sun 25 Sep , 2016 23:17 pm
- Forum: Viceroy
- Topic: Sliding feed clutch and jamming gearbox....
- Replies: 4
- Views: 4963
Re: Sliding feed clutch and jamming gearbox....
So. Emboldened by Pete's comments (thanks!) I can report complete success :D The taper pin came out very easily - it's barely worth marking it up for replacement - on this shaft at least it's way off centre and can really only go in one way. New circlip purchased and fitted, and all back together ea...
- Fri 23 Sep , 2016 22:47 pm
- Forum: Viceroy
- Topic: Sliding feed clutch and jamming gearbox....
- Replies: 4
- Views: 4963
Re: Sliding feed clutch and jamming gearbox....
OK - so some progress - what's happened is now clear, although why is perhaps less so... The circlip (see picture) just to the right of the dog-sooth clutch gear has come out of its groove, allowing the gear to move to the right, and thus the mating teeth of the gear directly above it to fall into t...
- Wed 21 Sep , 2016 22:48 pm
- Forum: Viceroy
- Topic: Sliding feed clutch and jamming gearbox....
- Replies: 4
- Views: 4963
Sliding feed clutch and jamming gearbox....
Hi all. Quick question / brain picking about the dog clutch on the sliding feed shaft. I've been using my (metric) 250 for a bit now, and it's been behaving well, especially once I got the belt tensions set up properly. After the sliding feed and the dog clutch working fine for a while, it has sudde...
- Thu 10 Mar , 2016 23:10 pm
- Forum: Viceroy
- Topic: T-Slotted cross-slide
- Replies: 7
- Views: 6821
Re: T-Slotted cross-slide
The cross-slide, of course - silly me.... :? Actually, I've found a drawing for the 280 version here: http://www.denfordata.com/bb/viewtopic.php?t=1986 which from a couple of measurements on mine appears to be the same as that for the 250... Anyone know if that's correct ? I see different part numbe...
- Wed 09 Mar , 2016 23:12 pm
- Forum: Viceroy
- Topic: T-Slotted cross-slide
- Replies: 7
- Views: 6821
Re: T-Slotted cross-slide
Hi all,
Is the drawing for the 250 topslide (slotted or otherwise) available anywhere? I guess it's pretty much the same as the other models.
OK - later edit - it's ML100-503, at least according to the parts list.
Thanks in anticipation,
Youra.
Is the drawing for the 250 topslide (slotted or otherwise) available anywhere? I guess it's pretty much the same as the other models.
OK - later edit - it's ML100-503, at least according to the parts list.
Thanks in anticipation,
Youra.
- Wed 09 Mar , 2016 8:14 am
- Forum: Viceroy
- Topic: T-Slotted cross-slide
- Replies: 7
- Views: 6821
Re: T-Slotted cross-slide
Thanks Richard
I'm in the UK - Stockport - I've sent John Ward an email - let's see what he comes back with.
You're probably right about the tapered gib....!
Cheers,
Youra.
I'm in the UK - Stockport - I've sent John Ward an email - let's see what he comes back with.
You're probably right about the tapered gib....!
Cheers,
Youra.
- Mon 07 Mar , 2016 23:28 pm
- Forum: Viceroy
- Topic: T-Slotted cross-slide
- Replies: 7
- Views: 6821
T-Slotted cross-slide
Hi all. I'm now actually using my 250 after adding a VFD and cleaning the congealed crud out of the change-gear banjo etc... Some more cleaning still to do, but the machine is now usable. I need to take a look at the bearing pre-load after looking at the finish Richard is getting once he sorted that...
- Fri 10 Apr , 2015 18:29 pm
- Forum: Viceroy
- Topic: Upper belt tension adjusters?
- Replies: 2
- Views: 3305
Re: Upper belt tension adjusters?
OK - moved them - just *very* tight for some reason, *very* large screwdriver used!
- Thu 09 Apr , 2015 22:00 pm
- Forum: User Stories / Projects / Courseware
- Topic: Denford Viceroy TDS VSD conversion
- Replies: 20
- Views: 44186
Re: Denford Viceroy TDS VSD conversion
Dazz, Really nice control panel on your 3ph conversion - I assume that's a special you made. Curious about one thing - you say you have full torque at low speed - are you using a particular VFD with vector control to do this, or just a 'normal' 3ph convertor? What model have you used? Thanks, Youra.
- Thu 09 Apr , 2015 21:42 pm
- Forum: Viceroy
- Topic: Upper belt tension adjusters?
- Replies: 2
- Views: 3305
Upper belt tension adjusters?
Hi guys Ok - so, how do the adjusters for the top belt work? I'm trying to adjust the top belt tension - the adjusters on the intermediate shaft are (I think the older type) brass with a single screwdriver slot to turn them, but they are so stiff that I'm wondering if I've missed a lock screw somewh...
- Wed 25 Feb , 2015 12:16 pm
- Forum: Viceroy
- Topic: Threading auto knock-off
- Replies: 11
- Views: 9333
Re: Threading auto knock-off
My manual (downloaded, not one that came with the lathe) simply says something along the lines of:
"Automatic threading knock-off is also available", but nothing else.
Dazz - did I see you had drawings for this feature somewhere?
Y.
"Automatic threading knock-off is also available", but nothing else.
Dazz - did I see you had drawings for this feature somewhere?
Y.
- Wed 25 Feb , 2015 9:00 am
- Forum: Viceroy
- Topic: Threading auto knock-off
- Replies: 11
- Views: 9333
Re: Threading auto knock-off
Yup - as Dazz says, it's original. Dazz - reading your other thread - did you every get very far with the 'gun trigger' style knock-off? Now I'm almost set up with my new workshop (the electrician finished off last week) I'm looking properly at the machines again, and was thinking in terms of a vers...